CULTIVATORS

CU3000 SERIES

Starting at $31,795

The CU3000 Series has been especially designed to work with the most powerful tractors. With 179kW (240HP) maximum for 9’10” (3.0m) and up to 261kW (350HP) for the 16’4” (5.0m) folding model, the Kubota cultivator CU3000 Series has become the benchmark regarding admissible power. It can, therefore, be combined with any type of roller and accessories which makes it extremely versatile. This quality to absorb the strongest forces also ensures a very long durability.
The Cultivator range can be equipped with two types of tines and a wide selection of shares. According to the operation requested and the type of soil, the large choice of following implements allows all sorts of cultivation to be carried out: from stubble cultivation at 2” (5cm) to deep loosening at 12” (30cm) working depth.

9’10” (3m) – 11’6″ (3.5m)

Rigid

7 – 14

OVERVIEW

UNIVERSAL CULTIVATOR

From 3.0 to 4.0 m, working 5 to 30 cm deep.

WIDE CHOICE OF REAR ROLLER AND LEVELING EQUIPMENT

The full range of following implements. The 3-row configuration allows all combinations via the parallelogram of the machine. The various levelling devices are available on a H-frame which also receives the rollers. This H frame is fixed by 4 bolts and allows the combination of all sorts of equipment with the same implement in order to adjust the machine to the season or the operation requested which makes the machine completely versatile.

HIGHER VERSATILITY
WITH 3 ROWS

The 3-row design supports the intensive mixing and ensures a good distribution of the straw over the whole working width. This allocation of the tines together with the high underbeam clearance of 34 1/4” (870mm) allows the free flow of material without the risk of blockage even in case of long and fibred residues such as corn, etc … The easy material flow with the 3-row frame also reduces the power requirements and the fuel consumption whilst ensuring a good cutting quality at the same time.

FEATURES

Overlay

Knock On System

To change the points on a 9'10" (3.0 m) unit with 10 tines it takes 1 minute 30 seconds - whilst 20 minutes are needed with bolted reversible shares.
Overlay

UNIQUE LEG DESIGN
PROTECTING THE
STRUCTURE AND
NO MAINTENANCE

The CU tine is a maintenance–free zone. All components are heat treated and produced from a very high quality hardened steel. These parts are then able to sustain high pressure and friction without the need for any greasing. Greasing is both costly and time consuming and in some cases greasing parts can cause even more damage (at its worst grease attracts fine dust and encourages wear).
Overlay

LOW FUEL CONSUMPTION
UNIQUE LEG DESIGN VIBRATING
FOR INTENSIVE EFFECT IN THE SOIL
BUT LOW FUEL CONSUMPTION

The tine shape with two working angles guarantees efficient penetration. The first zone lifts the soil for good loosening. The second zone with little power requirement ensures efficient and homogeneous mixing.
Overlay

INTENSIVE MIXING
OF THE RESIDUES

The quality of the incorporation of vegetable residues and the capacity to loosen the soil characterise the main features of a cultivator. As a matter of fact 19/32" - 25/32" (1.5 to 2 cm) working depth are needed to incorporate 1 tonne of straw per hectare and to optimise the mixing of the soil with the plant residues.The 3-row design supports the intensive mixing and ensures a good distribution of the straw over the whole working width. This allocation of the tines together with the high underbeam clearance of 34 1/4" (870 mm) allows the free flow of material without the risk of blockage even in case of long and fibred residues such as maize, etc ... The easy material flow with the 3-row frame also reduces the power requirements and the fuel consumption whilst ensuring a good cutting quality at the same time.
Overlay

OPTIONAL SEED HOPPER
SH200 AND SH500

The SH200 and SH500 are delivered with two types of rotor: one for small seeds (rape, mustard, cabbage, clover, etc ...), and a medium rotor for seeds (vetch, grass, sunflower). The agitator placed above the rotor ensures a steady stream of seeds. A brush, located at the base of the rotor, will regulate the flow and improve the setting accuracy. For large seeds (peas, horse beans, etc), it is strongly advised to choose the Flex rotor option, which is able of deforming with large seed diameter.

Contact Sales

Request a Quote

MODELS

	WORKING WIDTH	FRAME	NO. OF TINES	MSRP
CU3300	9’10” (3.0m)	Rigid	10	$31,795	Request a Quote
CU3350	11’6” (3.5m)	Rigid	12	$32,235	Request a Quote
CU3400	13’1” (4.0m)	Rigid	14	$35,601	Request a Quote
CU3300CD	9’10” (3.0m)	Rigid	7	$36,253	Request a Quote
CU3350CD	11’6” (3.5m)	Rigid	9	$39,971	Request a Quote

DOWNLOADS

CU3300

Brochure

CU3350

Brochure

CU3400

Brochure

CU3300CD

Brochure

CU3350CD

Brochure

CULTIVATORS

CU3000 SERIES

Starting at $31,795

9’10” (3m) – 11’6″ (3.5m)

Rigid

7 – 14

OVERVIEW

UNIVERSAL CULTIVATOR

WIDE CHOICE OF REAR ROLLER AND LEVELING EQUIPMENT

HIGHER VERSATILITY WITH 3 ROWS

FEATURES

MODELS

DOWNLOADS

CU3300

CU3350

CU3400

CU3300CD

CU3350CD

HIGHER VERSATILITY
WITH 3 ROWS